8 inch lcd display tft screen with capacitive touch 800*1280 TFT LCD display is very stable. with Capacitive Touch Screen. The resolution is 800×1280 pixels and the aspect ratio is 10:16. This TFT display uses an JD9365DA driver IC supporting MIPI interfaces. This 8-inch screen is IPS/Free/ Full viewing angle type,With the IPS technique, the display allows viewers to view the screen from wider viewing angles (85/85/85/85 degrees). This 8 inch screen is IPS/Free/ Full viewing angle type.It also features a high brightness of 900 cd/m2.
This LCD module is highly versatile. It can operate at temperatures from -20°C to +70°C; its storage temperature ranges from -30°C to +80°C.
Ekran wyświetlacza LCD
Searech
8 Inch LCD Display Tft Screen With Capacitive Touch
►Size 8.0 inch
►Resolution:800 * RGB * 1280 pixel
►View Direction:IPS
►Interface:MIPI
►Driver IC:JD9365DA
►CTP: capacitive touch screen PCAP
►Brightness(cd/m²): 900
►Outline Dimension: 114.60（W）* 184.10（H） * 2.60(T) mm
Specyfikacje
| Rozmiar | 8 | cal |
| Wymiar LCM | 114.60（W）* 184.10（H） * 2.60(T) | mm |
| LCD Active Area | 107.64 * 172.22 | mm |
| Number OfDots | 800 * RGB * 1280 | piksel |
| Typ LCD | a-Si TFT | |
| Kierunek oglądania | ALL O’clock | |
| Układ scalony sterownika | JD9365DA | |
| Typ interfejsu | MIPI 4lanes | |
| Temperatura pracy | -20℃~ 60℃ | |
| Temperatura przechowywania | -30℃~ 80℃ | |
| Typ podświetlenia | 24 LEDs |
Rysunek
PIN
LCM PIN
| NIE. | Symbol | Opis |
| 1-3 | LEDA | Power supply for Black Light,Anode |
| 4 | GND | Uziemienie |
| 5-8 | LEDK | Power supply for Black Light,Cathode |
| 9-10 | GND | Uziemienie |
| 11 | D2+ | MIPI-DSI Data differential signal input pins. (Data lane 2) |
| 12 | D2- | MIPI-DSI Data differential signal input pins. (Data lane 2) |
| 13 | GND | Uziemienie |
| 14 | D1+ | MIPI-DSI Data differential signal input pins. (Data lane 1) |
| 15 | D1- | MIPI-DSI Data differential signal input pins. (Data lane 1) |
| 16 | GND | Uziemienie |
| 17 | CLK+ | MIPI-DSI CLOCK differential signal input pin |
| 18 | CLK- | MIPI-DSI CLOCK differential signal input pin |
| 19 | GND | Uziemienie |
| 20 | D0+ | MIPI-DSI Data differential signal input pins. (Data lane 0) |
| 21 | D0- | MIPI-DSI Data differential signal input pins. (Data lane 0) |
| 22 | GND | Uziemienie |
| 23 | D3+ | MIPI-DSI Data differential signal input pins. (Data lane 3) |
| 24 | D3- | MIPI-DSI Data differential signal input pins. (Data lane 3) |
| 25 | GND | Uziemienie |
| 26 | TE | Serves TE (Tearing Effect ) pin on MPU interface |
| 27 | RESET | Sworzeń resetowania |
| 28 | ID | LCD ID |
| 29 | IOVCC 1.8V | I/O Power Supply （1.8V） |
| 30-31 | VDD 3.3V | Power Supply（2.8V） |
CTP PIN
| NIE. | Symbol | Opis |
| 1 | SDA | I2C Data Singal |
| 2 | SCL | I2C Clock Singal |
| 3 | RST | Reset Pin For CTP |
| 4 | INT | Interrupt Singal |
| 5 | VCC 3.3V | POWER SUPPLY（3.3V） |
| 6 | GND | Uziemienie |
