8 inch lcd display tft screen with capacitive touch 800*1280 TFT LCD display is very stable. with Capacitive Touch Screen. The resolution is 800×1280 pixels and the aspect ratio is 10:16. This TFT display uses an JD9365DA driver IC supporting MIPI interfaces. This 8-inch screen is IPS/Free/ Full viewing angle type,With the IPS technique, the display allows viewers to view the screen from wider viewing angles (85/85/85/85 degrees). This 8 inch screen is IPS/Free/ Full viewing angle type.It also features a high brightness of 900 cd/m2.
This LCD module is highly versatile. It can operate at temperatures from -20°C to +70°C; its storage temperature ranges from -30°C to +80°C.
Écran d'affichage LCD
Menu
Searech
![woocommerce-placeholder](https://www.lcdtop.com/wp-content/uploads/woocommerce-placeholder.png)
Ecran LCD 8 pouces avec écran Tft et tactile capacitif
►Size 8.0 inch
►Resolution:800 * RGB * 1280 pixel
►View Direction:IPS
►Interface:MIPI
►Driver IC:JD9365DA
►CTP: capacitive touch screen PCAP
►Brightness(cd/m²): 900
►Outline Dimension: 114.60(W)* 184.10(H) * 2.60(T) mm
Spécifications
Taille | 8 | pouce |
Dimension du LCM | 114.60(W)* 184.10(H) * 2.60(T) | mm |
LCD Active Area | 107.64 * 172.22 | mm |
Number OfDots | 800 * RGB * 1280 | pixel |
Type d'écran LCD | TFT a-Si | |
Direction de visualisation | ALL O’clock | |
CI du conducteur | JD9365DA | |
Type d'interface | MIPI 4lanes | |
Température de fonctionnement | -20℃~ 60℃ | |
Température de stockage | -30℃~ 80℃ | |
Type de rétroéclairage | 24 LED |
Dessin
PIN
PIN LCM
NON. | Symbole | Description |
1-3 | LEDA | Power supply for Black Light,Anode |
4 | GND | Sol |
5-8 | LEDK | Power supply for Black Light,Cathode |
9-10 | GND | Sol |
11 | D2+ | MIPI-DSI Data differential signal input pins. (Data lane 2) |
12 | D2- | MIPI-DSI Data differential signal input pins. (Data lane 2) |
13 | GND | Sol |
14 | D1+ | MIPI-DSI Broches d'entrée du signal différentiel de données. (voie de données 1) |
15 | D1- | MIPI-DSI Broches d'entrée du signal différentiel de données. (voie de données 1) |
16 | GND | Sol |
17 | CLK+ | Broche d'entrée du signal différentiel MIPI-DSI CLOCK |
18 | CLK- | Broche d'entrée du signal différentiel MIPI-DSI CLOCK |
19 | GND | Sol |
20 | D0+ | Broches d'entrée du signal différentiel de données MIPI-DSI. (voie de données 0) |
21 | D0- | Broches d'entrée du signal différentiel de données MIPI-DSI. (voie de données 0) |
22 | GND | Sol |
23 | D3+ | MIPI-DSI Data differential signal input pins. (Data lane 3) |
24 | D3- | MIPI-DSI Data differential signal input pins. (Data lane 3) |
25 | GND | Sol |
26 | TE | Sert la broche TE (Tearing Effect) sur l'interface MPU |
27 | RESET | Broche de réinitialisation |
28 | ID | LCD ID |
29 | IOVCC 1.8V | I/O Power Supply (1.8V) |
30-31 | VDD 3.3V | Power Supply(2.8V) |
CTP PIN
NON. | Symbole | Description |
1 | SDA | Données I2C Singale |
2 | SCL | Horloge I2C Singale |
3 | RST | Broche de réinitialisation pour CTP |
4 | INT | Interruption Singale |
5 | VCC 3.3V | ALIMENTATION(3.3V) |
6 | GND | Sol |